Carbide Rods
Available Grades: VP10X, VP06
About:
Widely used for making various kinds of carbide solid tools, such as reamers, twist drills, end mills, thread taps, etc. Suitable for machining cast irons, stainless steel, hear-resistant steel, hardened steel(hardness<60HRC), nickel based alloys, titanium alloys, etc.
Suitable for machining common steel, cast iron, stainless steel, heat-resistant steel, nickel based alloys and titanium alloys, etc. It is recommended for making conventional tools, such as twist drills, end drills, screw taps, etc.
Carbide Rods
Ball Nose Rods
Random Rods
Coolant Rods
Carbide Rods
Widely used for making various kinds of carbide solid tools, such as reamers, twist drills, end mills, thread taps, etc. Suitable for machining cast irons, stainless steel, hear-resistant steel, hardened steel(hardness<60HRC), nickel based alloys, titanium alloys, etc.
| 3/64×1-1/2 GPC | 17/64×3-1/2 GPC | 1-1/8×4-1/2 GPC | 14mmx88mm GPC |
|---|---|---|---|
| 0.062×12 GP | 0.277×6 GPC | 1-1/8×6 GPC | 14mmx101mm GPC |
| 1/16×1-1/2 GPC | 9/32×1-1/2 GPC | 1-1/4×4 GPC | 14mmx4″ GPC |
| 1/16×1-1/2 GP | 9/32×2-1/2 GPC | 1-1/4×4-1/2 GPC | 14mmx120mm GPC |
| 0.065×2-1/2 GPC | 9/32×3-1/2 GPC | 1-1/4×5 GPC | 14mmx125mm GPC |
| 5/64×1-3/4 GPC | 0.296×12 GPC | 1-1/4×6 GPC | 14mmx200mm GPC |
| 0.078×12 GP | 19/64×3-3/4 GPC | 1-1/4×7 GPC | 16mmx75mm GPC |
| 0.0862×2 | 0.308×6 GPC | 1-1/4×7-1/2 GPC | 16mmx88mm GPC |
| 0.092×3-1/2 GPC | 0.3099×3-1/4 GPC | 1-1/4×8 GPC | 16mmx92mm GPC |
| 3/32×1 GPC | 5/16×1-1/4 GPC | 1-1/4×10 GPC | 16mmx93mm GPC |
| 3/32×1.04 GPC | 5/16×2 GPC | 1-1/4×10-3/4 GP | 16mmx100mm GPC |
| 3/32×1-1/2 GPC | 5/16×2-1/8 GP | 1-1/4×12-1/2 GP | 16mmx125mm GPC |
| 3/32×1-3/4 GPC | 5/16×2-1/2 GPC | 1-1/4×13 GP | 16mmx150mm GPC |
| 3/32×2 GPC | 5/16×3 GPC | 1-1/4×19 GP | 16mmx6″ GPC |
| 3/32×3 GPC | 5/16×3-1/2 GPC | 1-1/2×5 GPC | 16mmx200mm GPC |
| 3/32×2 GP | 5/16×3-3/4 GPC | 1-1/2×7-1/2 GPC | 16mmx12″ GP |
| 3/32×12 GP | 5/16×4 GPC | 1-1/2×19 GP | 17mmx4″ GPC |
| 0.096×12 GP | 5/16×5 GPC | 2mmx50mm GPC | 18mmx75mm GPC |
| 0.098×4 GPC | 5/16×6 GPC | 3mmx38mm GPC | 18mmx92mm GPC |
| 0.098×6 GPC | 5/16×12 GP | 3mmx38.1mm GPC | 18mmx93mm GPC |
| 7/64×2-1/4 GPC | 0.324×6 GPC | 3mmx39mm GPC | 18mmx100mm GPC |
| 0.116×12 GP | 21/64×4 GPC | 3mmx50mm GPC | 18mmx125mm GPC |
| 1/8×7/8 GPC | 23/64×4 GPC | 3mmx51mm GPC | 18mmx150mm GPC |
| 1/8×1 GPC | 23/64×8 GPC | 3mmx65mm GPC | 18mmx6″ GPC |
| 1/8×1-1/2 GPC | 11/32×4 GPC | 3mmx75mm GPC | 18mmx200mm GPC |
| 1/8×2.04 GPC | 3/8×2 GPC | 3mmx76mm GPC | 20mmx100mm GPC |
| 1/8×2-1/4 GPC | 3/8×2-1/2 GPC | 4mmx45mm GPC | 20mmx4″ GPC |
| 1/8×2 GPC | 3/8×3 GPC | 4mmx50mm GPC | 20mmx105mm GPC |
| 1/8×2-1/2 GPC | 3/8×3-1/8 GPC | 4mmx51mm GPC | 20mmx125mm GPC |
| 1/8×3 GPC | 3/8×3-1/4 GPC | 4mmx65mm GPC | 20mmx150mm GPC |
| 1/8×3-1/4 GPC | 3/8×3-1/2 GPC | 4mmx75mm GPC | 20mmx6″ GPC |
| 1/8×4 GPC | 3/8×4 GPC | 4mmx76mm GPC | 20mmx200mm GPC |
| 1/8×4-1/2 GPC | 3/8×4-1/4 GPC | 4mmx100mm GPC | 22mmx105mm GPC |
| 1/8×6 GPC | 3/8×4-1/2 GPC | 5mmx23mm GPC | 25mmx100mm GPC |
| 1/8×12 GP | 3/8×5 GPC | 5mmx50mm GPC | 25mmx4″ GPC |
| 0.1285×4 GPC | 3/8×6 GPC | 5mmx51mm GPC | 25mmx122mm GPC |
| 0.1285×6 GPC | 3/8×6-1/2 GPC | 5mmx60mm GPC | 25mmx150mm GPC |
| 0.132×12 GP | 3/8×8 GPC | 5mmx75mm GPC | 25mmx205mm GPC |
| 9/64×2-1/2 GPC | 3/8×12 GP | 5mmx76mm GPC | 25mmx6″ GPC |
| 0.148×12 GP | 25/64×4-1/2 GPC | 6mmx32mm GPC | 3x330mm GP |
| 0.1562×3 GPC | 13/32×4-1/2 GPC | 6mmx50mm GPC | 3.5x330mm GP |
| 5/32×2 GPC | 27/64×4 GPC | 6mmx50.8mm GPC | 4x330mm GP |
| 5/32×2-1/2 GPC | 27/64×4-1/2 GPC | 6mmx51mm GPC | 4.5x330mm GP |
| 5/32×3 GPC | 7/16×2-1/2 GPC | 6mmx55mm GPC | 4.7x310mm GP |
| 5/32×12 GP | 7/16×2-3/4 GPC | 6mmx57mm GPC | 5×12″ GP |
| 0.159×4 GPC | 7/16×3 GPC | 6mmx58mm GPC | 5x330mm GP |
| 0.159×6 GPC | 7/16×3-1/2 GPC | 6mmx60mm GPC | 5.2x330mm GP |
| 0.1610×2-1/2 GPC | 7/16×4 GPC | 6mmx63mm GPC | 5.5x330mm GP |
| 0.1645×3.25 PT | 7/16×4-1/2 GPC | 6mmx63.5mm GPC | 6x330mm GP |
| 0.1655×6 GPC | 7/16×6 GPC | 6mmx2.5″ GPC | 6.5x330mm GP |
| 0.171×2 GPC | 7/16×12 GP | 6mmx64mm GPC | 7x330mm GP |
| 11/64×6-1/2 GPC | 29/64×4-3/4 GPC | 6mmx65mm GPC | 7.5x330mm GP |
| 11/64×2-3/4 GPC | 29/64×6 GPC | 6mmx66mm GPC | 8x330mm GP |
| 11/64×7 GPC | 15/32×4 GPC | 6mmx75mm GPC | 8.5x330mm GP |
| 0.180×8 PT | 15/32×4-3/4GPC | 6mmx76mm GPC | 9x330mm GP |
| 0.185×3-1/2 GPC | 31/64×4-3/4 GPC | 6mmx3″ GPC | 9.5x330mm GP |
| 3/16×1-1/2 GPC | 1/2×2-1/2 GPC | 6mmx82mm GPC | 10x330mm GP |
| 0.187×2 GPC | 1/2×2-3/4 GPC | 6mmx96mm GPC | 10.5x330mm GP |
| 0.187×6 GPC | 1/2×3 GPC | 6mmx100mm GPC | 11x330mm GP |
| 3/16×2 GPC | 1/2×3-1/2 GPC | 6mmx4″ GPC | 11.5x330mm GP |
| 3/16×2-1/4 GPC | 1/2×3.626 GPC | 6mmx102mm GPC | 12x330mm GP |
| 3/16×2-1/2 GPC | 1/2×4 GPC | 6mmx106mm GPC | 12.5x330mm GP |
| 3/16×2-3/4 GPC | 1/2×4-1/2 GPC | 6mmx150mm GPC | 13x330mm GP |
| 3/16×3 GPC | 1/2×4-3/4 GPC | 6mmx151mm GPC | 13.5x330mm GP |
| 3/16×4 GPC | 1/2×5 GPC | 6mmx200mm GPC | 14x330mm GP |
| 3/16×6 GPC | 1/2×5-1/2 GPC | 7mmx25mm GPC | 14.5x330mm GP |
| 3/16×12 GP | 1/2×6 GPC | 7mmx35mm GPC | 15x330mm GP |
| 0.188×5 GPC | 1/2×7 GPC | 7mmx63mm GPC | 15.5x330mm GP |
| 0.1885×5.75 PT | 1/2×8 GPC | 7.5mmx4″ GPC | 16x330mm GP |
| 0.1880×3.25 PT | 1/2×8-1/2 GPC | 7.5mmx110mm GPC | 16.5x330mm GP |
| 0.1880×4 PT | 1/2×12 GP | 8mmx58mm GPC | 17x330mm GP |
| 0.1897×6 GPC | 17/32×4 GPC | 8mmx60mm GPC | 18x330mm GP |
| 0.19×8 GPC | 35/65×6 GPC | 8mmx63mm GPC | 19x330mm GP |
| 0.1905×4.3 GPC | 9/16×3 GPC | 8mmx2.5″ GPC | 20x330mm GP |
| 0.1905×6 GPC | 9/16×3-1/2 GPC | 8mmx64mm GPC | 21x330mm GP |
| 0.1905×6 GP | 9/16×4 GPC | 8mmx75mm GPC | 22x330mm GP |
| 0.1900×8 PT | 9/16×5 GPC | 8mmx76mm GPC | 23x330mm GP |
| 0.1900×3.25 PT | 9/16×5-3/4 GPC | 8mmx79mm GPC | 24x330mm GP |
| 0.1910×4 GPC | 9/16×6 GPC | 8mmx80mm GPC | 25x330mm GP |
| 0.1910×6 GPC | 9/16×8 GPC | 8mmx3.5″ GPC | 26x330mm GP |
| 0.1910×8 PT | 9/16×12 GP | 8mmx100mm GPC | 27x330mm GP |
| 0.1915×6 GPC | 5/8×3 GPC | 8mmx106mm GPC | 28x330mm GP |
| 0.1935×2-3/4 GPC | 5/8×3-1/2 GPC | 8mmx115mm GPC | 29x330mm GP |
| 0.1935×6 PT | 5/8×4 GPC | 8mmx150mm GPC | 30x330mm GP |
| 0.187×12 GP | 5/8×4-1/2 GPC | 8mmx200mm GPC | 32x330mm GP |
| 0.1980×4 GPC | 5/8×5 GPC | 9mmx83mm GPC | |
| 1/5×4 GPC | 5/8×5-3/4 GPC | 9.0mmx130mm GPC | |
| 13/64×2-1/4 GPC | 5/8×6 GPC | 9.5mmx130mm GPC | |
| 13/64×3 GPC | 5/8×7 GPC | 10mmx62mm GPC | |
| 0.213×3 GPC | 5/8×8 GPC | 10mmx63mm GPC | |
| 0.218×3 GPC | 5/8×10 GPC | 10mmx70mm GPC | |
| 0.213×2-3/8 GPC | 5/8×12 GP | 10mmx72mm GPC | |
| 0.2188×2.5 GPC | 3/4×3 GPC | 10mmx73mm GPC | |
| 7/32×2-1/2 GPC | 3/4×4 GPC | 10mmx75mm GPC | |
| 7/32×3 GPC | 3/4×5 GPC | 10mmx76mm GPC | |
| 0.221×12 GP | 3/4×5-1/2 GPC | 10mmx89mm GPC | |
| 0.222×6 GPC | 3/4×6 GPC | 10mmx90mm GPC | |
| 2/9×2-1/2 GPC | 3/4×7 GPC | 10mmx100mm GPC | |
| 0.2339×2.555 GPC | 3/4×8 GPC | 10mmx101.6mm GPC | |
| 0.234×6 GPC | 3/4×10 GPC | 10mmx4″ GPC | |
| 15/64×3-1/4 GPC | 3/4×12 GP | 10mmx106mm GPC | |
| 0.246×6 GPC | 3/4×13 GP | 10mmx115mm GPC | |
| 0.248×6 GPC | 7/8×4 GPC | 10mmx130mm GPC | |
| 1/4×1-1/2 GPC | 7/8×5 GPC | 10mmx135mm GPC | |
| 1/4×2 GPC | 7/8×6 GPC | 10mmx150mm GPC | |
| 1/4×2-1/4 GPC | 7/8×8 GPC | 10mmx151mm GPC | |
| 1/4×2-1/2 GPC | 7/8×12 GP | 10mmx6″ GPC | |
| 1/4×3 GPC | 1×3 GPC | 10mmx200mm GPC | |
| 1/4×3-1/4 GPC | 1×4 GPC | 11mmx83mm GPC | |
| 1/4×3-1/2 GPC | 1×4-1/2 GPC | 11mmx4″ GPC | |
| 1/4×4 GPC | 1×5 GPC | 12mmx75mm GPC | |
| 1/4×6 GPC | 1×5-1/2 GPC | 12mmx83mm GPC | |
| 0.250×6 GPC | 1×6 GPC | 12mmx83mm GPC |
Ball Nose Rods
Tolerance: h6
Ball nose rods are used in a Ball Nose end-mill. Using these rods reduces grinding time, improves production efficiency, and reduces production costs.
| 1/16×1-1/2 | 13/64×3 | 3/8×3 | 9/16×3 | 1×5 |
|---|---|---|---|---|
| 3/32×1.04 | 7/32×3 | 3/8×3-1/4 | 9/16×3-1/2 | 1×6 |
| 3/32×1-3/4 | 0.2188×2.5 | 3/8×4 | 9/16×4 | 1×7 |
| 3/32×2 | 1/4×1-1/2 | 3/8×4-1/2 | 9/16×5 | 1×8 |
| 1/8×1 | 1/4×2 | 3/8×5 | 9/16×6 | 1×9 |
| 1/8×1-1/2 | 1/4×2-1/2 | 3/8×6 | 5/8×3 | 1×10 |
| 1/8×2 | 1/4×3 | 3/8×8 | 5/8×3-1/8 | 1×12 |
| 1/8×2-1/4 | 1/4×3-1/2 | 3/8×6-1/2 | 5/8×3-1/4 | 1×12-1/2 |
| 1/8×2-1/2 | 1/4×4 | 3/8×12 | 5/8×3-1/2 | 1×13 |
| 1/8×3 | 1/4×4-1/2 | 27/64×4 | 5/8×4 | 1-1/8×4-1/2 |
| 1/8×4 | 1/4×5 | 27/64×4-1/2 | 5/8×4-1/2 | 1-1/4×4 |
| 1/8×4-1/2 | 1/4×6 | 7/16×2-1/2 | 5/8×5 | 1-1/4×5 |
| 1/8×12 | 1/4×6-1/2 | 7/16×3 | 5/8×6 | 1-1/4×5-1/2 |
| 5/32×2 | 1/4×7 | 7/16×3-1/2 | 5/8×7 | 1-1/4×6 |
| 5/32×2-1/2 | 1/4×8 | 7/16×4 | 5/8×8 | 1-1/4×6-1/2 |
| 5/32×3 | 1/4×12 | 7/16×4-1/2 | 5/8×10 | 1-1/4×7 |
| 5/32×12 | 9/32×1-1/2 | 7/16×6 | 5/8×12 | 1-1/4×7-1/2 |
| .1610×2-1/2 | 9/32×2-13/16 | 7/16×12 | 3/4×3 | 1-1/4×8 |
| 11/64×2-3/4 | 5/16×1-1/4 | 1/2×2-1/2 | 3/4×4 | 1-1/4×9 |
| 11/64×6-1/2 | 5/16×2-1/2 | 1/2×3 | 3/4×5 | 1-1/4×12-1/2 |
| 11/64×7 | 5/16×3 | 1/2×3-1/4 | 3/4×6 | 1-1/2×7-1/2 |
| 3/16×1-1/2 | 5/16×3-1/2 | 1/2×3-1/2 | 3/4×7 | |
| 3/16×2 | 5/16×3-3/4 | 1/2×4 | 3/4×8 | |
| 3/16×2-3/16 | 5/16×4 | 1/2×4-1/2 | 3/4×10 | |
| 3/16×2-1/4 | 5/16×6 | 1/2×5 | 3/4×12 | |
| 3/16×2-1/2 | 5/16×12 | 1/2×6 | 7/8×4 | |
| 3/16×3 | 11/32×4 | 1/2×7 | 7/8×5 |
Random Rods
Our Random Rods are unground and come in a variety of sizes. The length is usually 12-13 inches. Please contact us for more information.
| RR-06 – 3 | 32 x 13 |
|---|---|
| RR-07 – 7 | 64 X 12.25 |
| RR-07B – 7 | 64 X 13 |
| RR-08 – 1 | 8 X 12.25 |
| RR-09 – 9 | 64 X 13 |
| RR-10 – 5 | 32 X 13 |
| RR-11 – 11 | 64 X 13 |
| RR-12 – 3 | 16 X 12 |
| RR-12B – 3 | 16 x 13 |
| RR-13 – 13 | 64 X 13 |
| RR-14 – 7 | 32 X 13 |
| RR-15 – 15 | 64 X 13 |
| RR-16 – 1 | 4 X 13 |
| RR-17 -17 | 64 X 12.25 |
| RR-18 – 9 | 32 X 12.25 |
| RR-19 – 19 | 64 X 12.25 |
| RR-20 – 5 | 16 X 12 |
| RR-21 -21 | 64 x 12.25 |
| RR-22 – 11 | 32 X 12.25 |
| RR-23 – 23 | 64 X 12.25 |
| RR-24 – 3 | 8 x 12.25 |
| RR-25 – 25 | 64 X 12.25 |
| RR-26 – 13 | 32 X 12.25 |
| RR-27 – 27 | 64 X 12.25 |
| RR-28 – 7 | 16 X 12.25 |
Coolant Rods
For the production of drilling, reaming and threading tools with internal coolant supply.